Recent Posts

Pages: [1] 2 3 ... 10
1
General Discussion / Earn Money by Typing on Engrz Forum
« Last post by mechanic on February 22, 2017, 04:03:03 PM »


Introduction:

Want to earn some money? I don't know it worth for you or not, but if you can type some pages for me, I will pay you Rs. 5/- per page.I know it is very low, but you know in market composer takes 5-6 Rupees per page he types for us, so I offer my members if they can write, I will provide some articles from books and he has to compose them on the forum. Not just to compose it on word and paste it on forum. We will note the time of each user he write an article.Every member has to write at-least 100 pages, that means about 100 topics he has to create on forum with his own username and he will get Rs. 500/- . He may write all these articles in one day or either in a week. If he is failed to write in a week, he will now earn this money.We will provide the pages, you just have to compose it on the forum. Remember, do not copy and paste directly, compose it on the forum, if we found something we may deduct your money.



 Example of the Page you have to compose
Explanation:
In above figure, the page is one but questions are 9, so there must be 9 topics to create, each topic contains each question.These questions may be 9-10-12 or sometimes 4-5 per page, we will count for page not for topics.
Live sample of a post or question can be seen here.

Procedure:

Create account on forum but register your id and send a PM to me by using forum messages system, I will give you some pages to start writing. After 100 pages, money will be transferred to your account.


Rules

 
  • 1.       Must type on the forum directly, don’t copy and paste
  • 2.       Payment available through Easypesa, easyload, paypal.
  • 3.       Each task must be completed in one week.
  • 4.       Minimum payout on 100 pages.
  • 5.       We reserve the rights to deduct, cancel or old the payment without notification.

Want to know how to create account on Engrz? Click Here
Save
2
Bollywood MP3 Songs / Pardesi pardesi jana nahin - Raja Hindustani MP3 Download
« Last post by mechanic on February 21, 2017, 06:01:47 PM »
MP3 song in HQ is attached in this post, you can play or download it.


Film: Raja Hindustani
Year: 1996
3
Bollywood MP3 Songs / Tere Ishq main naachenge - Raja Hindustani MP3 Download HQ
« Last post by mechanic on February 21, 2017, 05:33:38 PM »
Very nice song from raja hindustani movie is attached below for free download
4
Mechanical Engineering / What is investment casting?
« Last post by mechanic on February 21, 2017, 01:49:46 PM »
Investment casting uses a pattern which may be made from wax, plastic, or other material. After the mold is made, the pattern is melted out. Thus a mechanized method of casting a great many patterns is necessary. the mold material is dependent upon the melting point of the cast metal. Tus a plaster mold can be used for some materials while others would require a ceremic mold. after the pattern is melted out, the mold is backed or fired when firing is completed the molten metal may be poured into the hot mold and allowed to the cool.

if the number of casting are to be made, then metal or permanent molds may be suitable. such molds have the advantage that the surfaces are smooth, bright, and accureate so that little, if any, machining is required. Metal-mold castings are also known as die castings and certrifutal castings.
5
Mechanical Engineering / Define:Damping [Definition]
« Last post by mechanic on February 21, 2017, 01:30:53 PM »
Damping: Cast iron has higher inherent damping properties, damping in steel structures occurs mainly in welds, if welded joints are properly designed, the damping of steel structure may approach that of cast iron.
6

Abstract:


This paper studies the three-dimensional finite element (FE) modeling for simulating the small-hole drilling process of AIS] 1045 by using FE package Abaqus/ Explicit. The large deformation of work and the chip formation in drilling process is realized by incorporating Johnson-Cook material constitutive model and material failure criterion. In order to verify the simulation model, the simulation and corresponding drilling tests are performed for the drilling process with 3-mm diameter solid carbide drills at several combination groups of rotational speeds and feed velocities. The estimated thrust force, torque and chip morphology from the simulation are in good agreement with those tested from experiments. The combination of both simulations and experiments not only reveals obvious varying pattern of thrust force, torque with the increasing of rotational speeds and feed velocities, which is consistent with the cutting theory, but also provides a more detailed and profound knowledge about the cutting mechanism including the contribution of chisel edge, drilling stage, and stress and strain distribution, which is assumed to be helpful for the optimization of the drill structure, geometry and drilling parameters.

7
Scholarships / Agency Number of Xidian University Xi'an China
« Last post by mechanic on February 19, 2017, 11:06:54 AM »
Agency Number of Xidian University is: 10701

This University is located in Xi'an, Shaaxi Province China.
8
Bollywood MP3 Songs / Kanta laga hai laga MP3 Download
« Last post by mechanic on February 19, 2017, 07:03:31 AM »
Kanta laga, dance music song is attached
9
Computer and I.T / The DBMS that is most difficult to use is?
« Last post by mechanic on February 18, 2017, 08:53:11 PM »
Question: The DBMS that is most difficult to use is _______?

Options are:


A. Microsoft's SQL server
B. Microsoft's Access
C. IBM's DB2
D. Oracle Corporation's Oracle

Correct answer is:

D. Oracle Corporation's Oracle
10
Question: Which of the following is not considered to be a basic element of an enterprise-class database system?

Options are:


A. Users
B. Databaase applictions
C. DBMS
D. COBOL Programs

Correct answer is:

D. COBOL Programs
Pages: [1] 2 3 ... 10